Petsafe Standard Bark Control Collar

Description

Help manage excessive and nuisance barking with the PetSafe Standard Bark Control Collar. Designed for dogs 3.6 kg and up, this automatic bark-control collar uses a vibration sensor to detect your dog’s vocal-cord movement and provides progressive static correction when barking continues. The system starts at the lowest correction level and gradually increases through 6 levels, helping your dog learn to reduce unnecessary barking.

The collar is designed for consistent use without complicated programming. Each correction is accompanied by an audible beep, while the built-in safety shut-off helps prevent excessive correction if your dog continues barking repeatedly.

Key Features

• 6 levels of progressive static correction that increase as barking continues.

• Vibration-activated detection senses movement from your dog’s vocal cords to help identify barking.

• Automatic correction adjustment: Starts at the lowest level and increases one level at a time when barking continues.

• Automatic safety shut-off: The collar stops correcting for 3 minutes if the dog barks 15 times or more within 50 seconds.

• Audible beep: Each static correction is accompanied by a warning tone.

• Waterproof design: Suitable for indoor and outdoor use and can withstand rain and splashing.

• Long battery life: The included 6-volt battery provides an average of approximately 3–6 months of use, depending on barking frequency.

• Adjustable nylon collar: Fits neck sizes up to 71 cm / 28 inches.

• Suitable for dogs 3.6 kg and up: Particularly suited to medium and larger dogs.

• No programming required: The progressive correction system works automatically.

How It Works

The PetSafe Standard Bark Control Collar detects the vibration produced when your dog barks. When barking is detected, the collar begins with the lowest static correction level.

If your dog continues barking within approximately 30 seconds, the correction level progressively increases. If your dog remains quiet for 30 seconds, the system resets to the lowest correction level.

For additional safety, the collar automatically stops correction for 3 minutes if it detects 15 or more barks within 50 seconds.

Suitable For

• Dogs weighing 3.6 kg / 8 lb or more

• Dogs with neck sizes up to 71 cm / 28 inches

• Medium and large dogs

• Excessive or nuisance barking

• Indoor and outdoor use

• Owners looking for an automatic bark-control solution

Waterproof Design

The PetSafe Standard Bark Control Collar is waterproof and designed for everyday outdoor use. It can handle rain, splashes and other wet conditions, making it suitable for dogs that spend time outside.

What’s Included

• PetSafe Bark Control Collar

• Adjustable nylon collar strap

• 6-volt PetSafe battery

• Operating guide

Product Dimensions

Collar Receiver:

• Length: 55 mm / 5.5 cm

• Width: 30 mm / 3 cm

• Height: 25 mm / 2.5 cm

Collar Strap:

• Length: 50 cm

• Width: 1.8 cm

Maximum Neck Size: 71 cm / 28 inches

Product Specifications

• Brand: PetSafe

• Product: Standard Bark Control Collar

• Model: PBC19-10765

• Type: Automatic bark-control collar

• Correction: Static stimulation

• Correction Levels: 6 progressive levels

• Activation: Vibration sensor

• Power: 1 × 6V battery

• Battery: PetSafe RFA-67

• Battery Life: Approximately 3–6 months

• Waterproof: Yes

• Minimum Dog Weight: 3.6 kg / 8 lb

• Maximum Neck Size: 71 cm / 28 in

• Collar Material: Nylon

• Use: Indoor and outdoor

Safety & Usage

For best results, the collar should be fitted correctly according to the manufacturer’s instructions and used as part of a consistent training approach. Check the fit and your dog’s skin regularly for signs of irritation, and remove the collar when it is not required. Always supervise your dog when introducing a new training device.